Basic methods for catching partridges


How to catch a partridge without a gun?

Sometimes you don’t want to particularly invent traps for partridges, but you don’t have a gun or you don’t have a permit for it. Friends invited you to hunt or your cottage is located in a place where there is a lot of game. How to catch a partridge without using a weapon? There are many methods, traps and tricks that we will describe in this article. It is also worth thinking about the time of year when the hunt will take place.

How to catch a partridge in winter? At this time of year it is difficult to spot her in the snow, because she has white feathers. There are also certain rules on how to catch a partridge in the summer, when its plumage is gray.

Where do partridges live?

In winter it is very difficult to spot this bird, however, in summer it is not much easier. The first step is to figure out exactly where the flock gathers. How to catch a partridge? There is no easier way than with an approach, a loop. The favorite habitats of partridges are bushes, thickets of willow, and dwarf birch (this is the most accessible food in winter). Such vegetation is found in large quantities in valleys where there are rivers.

In summer, you can also find partridge in tall grass. There are many summer traps for partridges. The main thing in hunting is caution and silence. This is a very shy and wary bird. By scaring it off, you can only ensure that the partridge does not crawl out of its shelter, hiding for a long time.

Fishing with a loop

How to catch a partridge with a noose? This trap is one of the simplest, suitable for any time of year. The most suitable material for loops is fishing line (no thicker than half a millimeter) or hair from a horse's mane. At one end of the fishing line you need to create a loop, about five millimeters, and tie the other end to the base - a thread, secured and hidden. You can use grains and bread for bait.

In winter, this method is much more accessible, more fruitful and results. It is necessary to make a hill out of snow, since partridges climb high hills in search of food. Place willow branches along the edges and place a loop in the center. You need to build a door in the branches - a passage through which the bird will definitely go inside for food, pecking off the available buds from the outside. Such loops can be placed from seventy to three hundred in one day.

Silky

You can make snares with your own hands. To do this you will need a copper wire with three cores. When knitting a loop, the diameter of the hole should be at least twelve centimeters, and the attachment to the base should be about half a meter long. How to catch a partridge with such a trap? It should be installed on a high snowdrift or in thickets of bushes. At a distance of two meters, fences made of branches (no more than fifteen centimeters high) should be placed. Snares are installed on these fences. A bird in search of food will certainly fall into such a trap, and the hunter will only have to reap the fruits of his handicraft. Experienced trappers can set more than three hundred such traps in one day.

Making snares

Loops with a diameter of about 12 cm and a tail length of about 50 cm are made from three-core copper wire. With the free end, this loop is fixed to a peg at a distance of about 15 cm from the ground. The loop can be disguised with grass or branches, and food can be scattered under it.

Also, fishing line snares are attached to a sheet of plywood at a distance of no more than 5 cm from each other. In summer, plywood is masked with grass or earth, in winter - with snow, and food is scattered on top. Such sheets are installed at a sufficient distance - at least 15 meters from each other. If you place them closer, then the bird that comes across will scare away everyone else.

This method is more popular in winter, since it is very difficult to catch a partridge in the summer using a snare. In winter, all tracks are clearly visible in the snow and it is easier to determine their feeding location. In addition, in winter there is not enough food for the birds; they can be lured with grain or berries. This is much more difficult to do in the summer.

Catching partridges with nets

Many people share tips on how to catch partridge using nets. This is one of the favorite methods of hunters, because it is truly a hunt, and not just setting traps. You can get more than a dozen birds at a time.

For this type of fishing you will need several people, a seven-meter net made of nylon or silone. Cells in the network should be no more than 1.5-2 centimeters. In order to properly install the net, rope spacers and poles are useful; they are placed in a straight line. The lower edge is installed above the ground (height - no more than one meter). The top should not be higher than six meters from the ground surface. Having installed the network, you need to move away from it at a distance of one kilometer. Hunters should disperse in a semicircle every fifty meters and begin to drive the birds towards the net.

Tips for hunters: catching partridges without a gun

If you think that the only way to catch a bird is by shooting it with a gun, you are deeply mistaken. Of course, this method is considered one of the simplest, but it is only suitable if you are going to eat the bird. But if you need partridge for breeding, then, of course, you need to know a more humane method. After all, you need the bird alive and unharmed.

So, the most popular method is a trap. This option is used mainly by those who want to catch several individuals. As a rule, for this purpose, a small enclosure with several entrances is made from a net, bait is placed there and they wait for their prey. Usually partridges search for food in small groups, so when the birds come inside it will be easy to catch them all at once.

True, this matter requires perseverance and patience. You can imagine how long you sometimes have to wait in ambush until the partridges want to taste your gift. There is another method similar, but simpler. To do this, a feeder is placed, and a net is suspended above it. When the bird approaches the food, the hunter pulls the rope and the net covers the birds.

Fishing with a gun

If you have a gun, a hunting dog and a terrible desire to test your skills as a “hunter”, you can go partridge fishing. As a rule, birds can be caught using this method in the fall or late summer, when large flocks get close to agricultural crops.

Catching partridges with a gun is not so easy. The fact is that the bird does not allow a person to get close, it flies away before he can get the required distance for a shot. Therefore, the task in this case is to try to break up a group of birds and force them to hide in the grass one by one. At this moment, you must not hesitate, so that the birds do not gather together again.

In late autumn, partridges become extremely cautious, forcing the hunter to persistently pursue his brood. You need to know the area especially well in order to tire out the birds with a long pursuit and finally shoot someone.

There is also one secret. If, for example, partridges do not allow people to get close to them at all, you can fly a kite into the sky, shaped like a hawk. This will scare the birds and they will not be as dexterous and nimble and will also stop flying high. But even in this case, hitting the target requires experience and skill.

The most popular way, as we have already said, is to drive the birds into a net. For this, a network of nylon or silicone thread with a mesh size of 1.8-2 centimeters is used. It is placed in a straight line on poles and supported with rope struts. The upper edge of the mesh is stretched at a height of 6 meters, and the lower edge is not higher than 1 meter above the ground.

The width of the network itself is approximately 7 meters. When hung, such a net forms a kind of bag-like fold, which easily holds the caught partridge. But the distance above the ground is made so that hares can run under the net. The bird is caught using a net as follows:

  • set a trap;
  • a group of about 20 people go to a distance of 1 kilometer from the grid, becoming a semicircle with a distance of 50 meters;
  • the bird is driven into the net;
  • trying to hide, partridges will fly to a height of 4-5 meters above the ground, so they will easily fly into the net;
  • having gotten their paws entangled, they will no longer be able to get out;
  • The caught birds are placed in special baskets.

It is important to note that with this method of fishing you need to know exactly where the flock of partridges are sitting in order to drive them in the right direction towards the net.

Bottle fishing

This is another fairly popular modern method that hunters use. However, it is mainly applicable in early spring and winter, when there is a sufficient amount of snow. Everything is very simple, for this you should do:

  1. Take a regular plastic bottle and cut off the bottom by about three-quarters.
  2. Then we take bait (grain and berries), fill a thermos with hot water, and go into the forest to the nearest bird habitats.
  3. Now we need to make ice holes. To do this, insert the bottle, neck down, into a snowdrift and pour hot water into it. The snow around the bottle melts, forming ice crusts.
  4. After removing the bottle, the holes freeze.
  5. Then we sprinkle the top of the hole with snow and add food.
  6. The principle of the trap is this: the bird sees food, dives into the hole and gets stuck, because it cannot spread its wings and get out.
  7. The hunter just has to walk through the bait areas and collect the birds.

Catching a partridge with a bottle is quite possible. To do this you will need a regular plastic bottle, bait, hot water and a thermos.

  1. First you need to cut the bottom of the bottle to ¾ of its length.
  2. Before going into the forest, you need to take hot water in a thermos and bait (berries or grain).
  3. Having found the best place where the birds definitely live, we make original ice holes. We insert the bottle bottom down into the snowdrift, then pour hot boiled water into it. We are waiting for the moment when the snow around the bottle turns into ice.
  4. Next, we take out the bottle, sprinkle the trap with a small amount of snow and put bait on top.

The working principle of this method is very simple. The partridge discovers the food, dives into the hole for the bait and gets stuck, since the small diameter of the hole does not allow it to spread its wings. Also, instead of a plastic bottle, they use a champagne bottle. It is also filled with hot water and holes are made in the snow. You can only fish this way in winter and early spring.

Mass catching of partridges is also carried out using pen nets.

This method is not effective in bad weather, especially strong winds. It is usually used in winter.

  1. For fishing you need pen nets 6-8 m high, 300 m long with a mesh size of 5x5 cm.
  2. The nets need to be stretched and secured on poles with forks that are stuck into the ground.
  3. Next, you need to pick up and screw them at a height of 1.69-1.8 m.
  4. The distance between traps is 50-70 m.
  5. Experienced hunters recommend placing driven nets near dense bushes or in places where it is dark. On the horizon and in good light, the partridge will see the trap.
  6. You need to drive the birds slowly and quietly, and it is better to use a hunting dog for this. Only she must be well trained.

Let's set a snare

You can also catch game without using a gun using a snare. This method involves trapping a partridge in a noose and is used mainly for hunting Ptarmigan and only in winter. Snares are easy to make with your own hands.

  1. First you need to make the loops themselves. They require 3 strand copper wire. It is necessary to knit conditional loops, with the diameter of the hole being 12 cm, and the length of the tail to secure the snare to the twig – 50 cm. The number of snares for catching partridges depends on how many traps the hunter wants to make.
  2. Then we take the ready-made snares with us and head to the game’s habitat. To install hinges, you need to look for large snowdrifts and small thickets of dwarf willow or birch bushes.
  3. We make fences from willow branches and stick them into the snow as if they were the tops of bushes. Leave 40 cm free above the snow surface. The distance between the fences should be 2 m.
  4. In these 2-meter openings we install sticks with loops so that the height of the top is approximately 15 cm.
  5. Now all that remains is to wait, as a partridge, walking in the snow and looking for food, accidentally gets its head into a noose.

It also happens: How to catch saberfish - a video about where to fish in the spring and fishing techniques with an elastic band

According to experienced hunters, snare fishing is the most effective.

You can catch game birds in other ways, for example, using a disposable cup. You can learn how to do this by watching the video below.

How to catch a partridge in winter? At this time of year it is difficult to spot her in the snow, because she has white feathers. There are also certain rules on how to catch a partridge in the summer, when its plumage is gray.

For this type of fishing you will need several people, a seven-meter net made of nylon or silone. Cells in the network should be no more than 1.5-2 centimeters. In order to properly install the net, rope spacers and poles are useful; they are placed in a straight line. The lower edge is installed above the ground (height - no more than one meter).

Frightened, the partridges will rush away from people and get caught in the net. Their paws will get tangled in the cells. All that remains is to collect the loot. For a successful hunt, you need to move away from the installed net on different sides, and under no circumstances move in the center. This way you can scare away the birds and disperse them far from the net.

What you need for net fishing:

  1. The pen nets are 6–8 meters high and 300 meters long. The size of the cells should not be more than two centimeters.
  2. These nets are stretched, attached to poles stuck into the ground.
  3. They are picked up and twisted at a height of about 1.8 meters.
  4. There is a distance of 50–60 meters between traps.
  5. It is better to place the net near dense bushes or in dark places, otherwise the bird will notice the trap set.
  6. Birds must be driven carefully, preferably with the help of a good hunting dog.

When the traps are ready, the hunters disperse in a semicircle, every 50 meters, and drive the birds into the nets. Partridges, running away from people, get caught in nets and become entangled in them. A frightened hare might accidentally run into such a snare. After this, all that remains is to collect the caught crop.

Nets are best made from silicone or nylon thread. It is also worth considering that the method does not work in strong winds. In winter, this method of catching birds can also be used.

Partridges are still a desirable prey for hunters

The bearded (or Daurian) partridge is very similar to the previous species, but its habitat extends from Southern Siberia to Dauria and the Altai steppes. It is also found in the Fergana Valley in Uzbekistan. The white partridge lives in taiga forests and tundra. During the year they roam considerable distances in search of food. The red partridge, or chukar, is common in Central Asia and Kazakhstan.

How to catch a partridge with a bottle?

This is a purely winter way of catching partridge. And the most humane. Perfect for people who are not going to eat the trophy, but catch partridges in order to start breeding them. All other methods described above can harm the bird: break a leg or wing. To hunt partridge with a bottle, you will need a lot of snow and plastic containers. Berries and grains are suitable for bait.

It wouldn’t hurt for a hunter to take a thermos with a hot drink and a couple of sandwiches with him, because the time spent searching and waiting for the bird may take a long time. You cannot leave a partridge in a trap for a long time; it will simply die there, so you should prepare thoroughly. You need to cut off the bottom of the bottle by three quarters of the length. Stick the resulting container into the snowdrift, pour hot water into it. After you remove the bottle, a hole with icy edges will form in its place. You need to wait until it freezes completely, then sprinkle it with snow. Place grains and berries there and wait for the bird. A partridge, having pecked food, will not be able to get out of the hole, since its edges are slippery. That's it, it's done!

fb.ru

Bird in a net

Summer is a hunter's favorite time. This period is considered the most favorable for catching partridges. One of the common means for hunting birds is nets. This toolkit is made from a special silicone thread. In some cases, a nylon type can be used. The divisions of the thread should have a size not exceeding 2 cm. In order to set the trap, it is necessary to use poles and ropes. The most convenient location of the latter will be a straight line. The distance of the lower side to the ground should be 1 meter, while the upper side should be 6 m. It is most effective to use a mesh with a width of 7-8 meters.

  • First you need to choose a place where the most birds are located.
  • Traps must be placed at a distance of up to 1 kilometer from the grid in a semicircle shape.
  • Every 50 meters there should be a person who will drive the game.
  • Since the partridges begin to be afraid, when they fly away, they end up in a net.
  • By means of a bag-like fold above the ground, they will get caught and become entangled.
  • After this, you simply need to collect the loot and put it in previously prepared bags.

Summer methods

Partridge nets and snares are placed near the place where the birds feed. Most often this is:

  • Fields with potatoes or beets,
  • alfalfa fields,
  • Dense bushes along the banks of lakes and rivers,
  • Vineyards,
  • Fields of cereal crops.
  • Summer methods of catching birds
  • Two network method

The easiest way to catch a partridge. The first network is woven from a strong thread with a mesh of 2.2 * 2.2 cm. Length - from 20 to 40 m, width - no more than 50 cm. The second is made from a thin rope with a mesh of 3 * 4 cm, length from 15 to 30 m, width from 60 to 70 cm.

A wide net is thrown over a narrow one, and suspended on poles no more than a meter high. The poles are installed at a distance of 1.5 -2 m from each other. A narrow mesh should sag freely, and a wide one should be pulled tight. Branches and leaves are woven in for camouflage. When the trap is set, three or four beaters lift the bird and drive it to the net. Partridges easily pass through large cells, but become entangled in small ones. Hunters can only untangle the chukars and close them in the cage.

Read also: Features of keeping guinea fowl with chickens

Free net fishing method

For this method, a net made of nylon or silicone is used, no more than 7 m wide, and with a mesh size of 1.5 * 1.5 cm. Such nets are often used for fishing. The length should be about 30 m. It is stretched on high poles, and rope struts are used to support it. From the ground, the upper edge is located at a height of 6 m, and the lower edge is no more than a meter.

When installed correctly, the net hangs freely, forming folds. This will ensure safe retrieval of the birds.

Hunting requires a group of beaters. The farthest of which should be at a distance of a kilometer from the trap. And between members of the group a distance of 60-80 m is maintained. It is important to raise the bird on its wing with noise and point it towards the trap.

Cone net fishing method

The fishing process is similar to the previous one. The difference is in the network itself. The cone-shaped one is woven from a strong thick thread, and its dimensions are:

  • Length: 6.5 m,
  • Inlet diameter - 0.6 m,
  • The cell pitch is 4.5 cm.

Two wings are sewn to the base of the net, each 20 m long and 40 cm wide. The wings are spread apart and secured with pegs.

Another method of fishing with a cone net is used in the evening. For the trap, a net is used, 150 m long, about 8 m wide, and with a cell of 5 * 5 cm. It is necessary to make several poles, 7 m high, and install them on the same line. A net is attached to them with ties or wire, which is folded from below in the form of a bag.

They place the trap against the backdrop of trees or bushes, where it is more difficult to notice.

The group of beaters should consist of 10-15 people. They begin to raise the birds with a quiet rustle, and only a few meters from the net they force the chukars to stand on their wings with loud screams.

Cover net fishing method

To catch chukars, a trap is made in the form of a net, similar to a tent. It is knitted from nylon, about 1 mm thick. The cell pitch is no more than 4*4 cm. The side of each square is 7.5 m. The trap is installed at the bird feeding site. A 3 mm thick cord is threaded through the cells along the perimeter and diagonally for stretching.

A hole with a diameter of 8-10 cm is made in the central part, the edges of which are fastened with a metal ring. A stake 150 cm long is driven into the ground. A ring is attached to the top of it, and a guard is tied to the opposite side. It also holds the top of the tent. The edges of the net are secured with a cord and small pegs at a distance of 20-30 cm from the ground, and a long rope is tied to the guard. Under the tent, oats, barley, bran, and corn are poured onto the ground as bait.

The hunter hides nearby and waits for the moment. When the birds gather under the tent, the hunter pulls the cord and the net falls on the birds. The method is suitable only for those who can endure the inconvenience associated with long periods of sitting still.

We use a bottle

An unusual, but quite effective method of catching partridge is a bottle. The main tools required for this process are a bottle, a thermos, hot water and, in fact, the “biting material” - bait. In order to prepare this trap, you need:

  • To make the trap itself from the bottle: you need to cut three quarters of its length.
  • You need to pour boiling water into the thermos (will be needed in the future) and prepare bait (grain or berries).

At first glance, it may seem that this is just a set of incomprehensible actions. Nevertheless, the principle of operation of this trap is quite effective: a partridge, having found food, dives into a hole for bait, gets stuck and is caught. It gets stuck because the small diameter of the hole prevents the bird from spreading its wings to take off.

As an alternative to a plastic bottle, you can use a champagne bottle. The operating principle of this design is the same.

How to make a loop

Another “winter” way of catching this bird is a loop. Masters of their craft make loops from fishing line, which is usually used in fishing. It is best to use a fishing line whose cross-section is close to 0.5 mm. One end of the fishing line is used to prepare a half-centimeter-sized loop, and the second is attached to the middle of the base of the trap, consisting of a half-meter double thread.

In order to make such a trap, you need:

  • Form a snow hill, the height of which is half a meter and the width is 0.8 m.
  • To make a bait, you need to place willow branches along the edges of the embankment.
  • Between them is a fence with a door to which a spine is attached.
  • The loop is installed at a height of 7-8 meters.

Thus, we get the following bait: when a partridge is detected, it begins to peck at the buds, as a result of which it makes its way to the food; Then she gets caught in a loop and falls into a hole in the snow. The distance between the loops must be at least 15 cm.

The Taimyr method should also be mentioned. Here we use a fishing line with a diameter of half a millimeter and a wire with a cross-section of about 1 mm. The latter is divided into two equal parts (half a meter each). On one side you need to make a 4 mm ring, to which another 10 mm eyelet is attached. To make all the work easier, you should use pliers.

Snare device

No less effective and successful is the method of catching partridges using snares. Partridge snares are very varied, but the general principle of their operation is to make a device that has a different number of loops in which the bird will become entangled. Snares for catching birds are also installed in their feeding areas.

A convenient snare can be made in the following way. To make it you will need a piece of fiberboard or plywood measuring about 0.3 m². The shape of the snare can be rectangular or arbitrary. Holes should be made in the sheet at a distance of 3-5 cm from each other using a thin drill (2 mm) or an awl. Pieces of thin fishing line 12-14 cm long are inserted into these holes. Loops are made from the fishing line, and knots are tied on the back side of the sheet so that the fishing line does not slip out through the holes. This way, the top of this partridge trap will be evenly covered with loops. Such devices are installed in feeding areas. For camouflage, the plywood is sprinkled with earth, and grain is poured on top. While feeding, the partridge will become entangled in the loops and struggle. Therefore, such traps must be placed at a distance of at least 15 m from each other so that the caught birds do not frighten others. Such snares need to be checked every day, otherwise the caught birds will be eaten by predators.

Wild partridges like to climb to high places to look around. This habit is used when constructing single snares. Where birds cannot reach the buds on the branches, they make a snow slide. The top of the slide should be flat. Willow or birch branches are installed along the edges of the top - the favorite food of partridges in winter. The branches are installed so that there is a 12-15 cm wide passage between them. A loop with a diameter of 12-13 cm is suspended in this passage. The loop is twisted from twenty white horsehairs and tied to a rope. The other end of the rope is attached to a stick stuck directly into the snow. This is done so that the partridge does not leave with the snare. You can make a clearing out of branches along which snares are suspended.

Let's set a snare

One of the difficult, but at the same time fascinating methods to catch a partridge is snares. This method should be used to hunt white partridges in winter, as they are more valuable than their counterparts. It is important to note that when using a snare, the partridges will be caught in a loop, which can easily be made correctly with your own hands.

Initially, snare loops are made. To do this, you need to use copper wire, which will have at least 3 cores. The “loops” must be knitted yourself. The diameter of the holes should not exceed 12 centimeters, while the length of the tail, through which the snare with the twig will be attached, should be half a meter. The number of snares for hunting partridges will directly depend on how many traps the hunter needs.

There should be at least half a meter of free space on top of the snow, and the distance between the fences should be 2 meters. It is these openings that will serve as a container for sticks with loops. After installing all the tools and carrying out all the preparatory operations, all that remains is to wait.

Thus, in most cases, you can do without a hunting gun to catch a bird. By following certain recommendations and using available materials, you can catch even more partridges, since you can use a large number of traps.

agronomu.com

Video “Making snares for partridges”

There should be at least half a meter of free space on top of the snow, and the distance between the fences should be 2 meters. It is these openings that will serve as a container for sticks with loops. After installing all the tools and carrying out all the preparatory operations, all that remains is to wait.

When the snares are ready, they need to be installed. This is done in thickets of bushes or high snowdrifts. Fences made of branches, no more than 15 centimeters high, are placed at a distance of a couple of meters. They are conveniently made from willow branches. Snares are installed on them. The partridge trap is ready. A bird in search of food gets caught in them, mistaking the trap for a bush.

This method is most often used in winter and is usually used for catching white partridges.

By the way, in this way you can catch not only a partridge, but also a hare. You need to understand that the installed snare can catch not only the bird you are looking for, but also a titmouse and a hare, and any animal suitable for the size of the snare. In winter, animals actively search for their food and it is easier to catch them with bait.

A convenient snare can be made in the following way. To make it you will need a piece of fiberboard or plywood measuring about 0.3 m². The shape of the snare can be rectangular or arbitrary. Holes should be made in the sheet at a distance of 3-5 cm from each other using a thin drill (2 mm) or an awl. Pieces of thin fishing line 12-14 cm long are inserted into these holes.

Loops are made from fishing line, and knots are tied on the back of the sheet so that the fishing line does not slip through the holes. This way, the top of this partridge trap will be evenly covered with loops. Such devices are installed in feeding areas. For camouflage, the plywood is sprinkled with earth, and grain is poured on top.

No less effective and successful is the method of catching partridges using snares

Wild partridges like to climb to high places to look around. This habit is used when constructing single snares. Where birds cannot reach the buds on the branches, they make a snow slide. The top of the slide should be flat. Willow or birch branches are installed along the edges of the top - the favorite food of partridges in winter.

The branches are installed so that there is a 12-15 cm wide passage between them. A loop with a diameter of 12-13 cm is suspended in this passage. The loop is twisted from twenty white horsehairs and tied to a rope. The other end of the rope is attached to a stick stuck directly into the snow. This is done so that the partridge does not leave with the snare. You can make a clearing out of branches along which snares are suspended.

Catching partridges using hanging loops is one of the most ancient methods. Hunters have come up with many ways to catch partridges using a noose. The most common are the Pechersky, Intilinsky and Taimyr methods. These methods differ in the subtleties of the trap design, but each of them is based on the use of a loop made of horsehair or nylon threads.

All ground snares must be checked regularly, not only for the safety of the birds, but also to replace the snares. The partridge will not get caught in frozen loops.

Another device taken from fishing gear and used for catching partridges is the venter. It is made from a mesh with cells up to 5 cm and consists of wings 20-30 m long and a cone, up to half a meter in diameter and 4-5 m long, stretched over hoops made of willow twigs. The cone is installed between the wings.

The back end of the cone is tied to a peg. Bait is poured along the wings and inside the cone, and willow or birch branches are stuck into the cone in front of the entrance. While feeding, partridges enter the cone, but cannot leave. Such a trap is installed along the route of the birds. However, birds can also be driven into the vent.

The easiest way to catch partridges is in snow holes made using an eggplant or champagne bottle. To do this you need:

  • take a 1.5 liter plastic bottle or a champagne bottle;
  • pour hot water into the bottle;
  • make holes in the snow by lowering the bottle neck down;
  • sprinkle the holes on top with snow;
  • Sprinkle grain on the snow above the hole.

When pecking at the grain, the partridge will fall into the hole upside down and be trapped by the ice walls of the hole. She will no longer be able to get out of such a trap on her own. Whatever method a real hunter uses to catch partridges, he will never cause unnecessary suffering to the bird and will not take too much from nature.

https://youtube.com/watch/CxHC0otEe6I

A few simple tips:

  1. In winter, you can navigate by footprints in the snow. Many fresh intersecting tracks mean that the flock is currently going to this place to feed.
  2. It is better to place the snare between the bushes and lightly sprinkle it with snow. This will camouflage the trap and help determine whether the birds came at all in case of failure.
  3. If the hunt was successful the day before, then you should not set a snare there. The flock is very careful and will definitely change its route.
  4. You should not additionally sprinkle food over the snares - this may attract unwanted guests (crows, titmice, etc.). If partridges get into the habit of going to this particular place, they will definitely appear without bait.
  5. Don't forget to check the traps regularly, otherwise your prey may fall to a hungry predator.

It also happens: How to catch a wild duck on a pond: how to catch ducks

In this article we looked at some methods of hunting partridges using snares and other homemade devices. You should know that you can catch birds from June to the end of February. Hunting is prohibited in spring, because... This is the breeding season.

How to catch a partridge?

The most popular method is trap . This option is used to catch several individuals at once. They make a small pen out of a net, put bait there and wait for prey. Partridges often forage in groups and it will be fairly easy to catch them all at once.

The matter requires patience and perseverance. After all, in an ambush you will have to wait a lot of time until the partridges peck at the gift. There is another simple and similar method. A feeder is placed and a net is hung on top. As soon as the bird approaches the feeder, the hunter, pulling the rope, covers the birds with a net.

Regardless of the time of year, the bird is very difficult to spot . First you need to figure out where the flock is. In winter, partridges love shrubs, dwarf birches, and willow thickets. Such plants are found nearby in valleys, not far from rivers.

In summer the bird can be found in tall grass. The main thing is to be quiet and careful, because these are very shy birds.

Fishing with a gun

If you have a dog, a gun and a desire, then feel free to go partridge fishing. It is easier to catch a bird this way at the end of summer or autumn , when flocks of partridges live close to agricultural fields.

Winter methods of catching chukars

  1. bottle
  2. Network
  3. By snare
  4. Loop

Partridge fishing is one of the most popular pastimes among hunters, more common than even hare fishing. Catching wild birds is carried out using similar methods; the main difference is the behavioral characteristics of each bird species.

Before catching partridge using any of the listed methods, you need to understand where they mainly live and what time of year is best to hunt. Most often, partridges are found in bushes and thickets of trees. These are valleys where there are rivers. In winter, it is not easy to notice a partridge; you need to understand where the flock usually gathers. In summer, these birds are also well hidden, but in addition to bushes, they can also be found in tall grass.

In winter, the most commonly used method of catching partridges is a noose. To do this, they find thickets of small bushes where birds live. Most often these are dwarf birches and willows, which partridges feed on during snowy winters. This method is very good for catching white species of wild birds.

This is due to the fact that they do not sit still and constantly migrate around. First you need to find their feeding areas, since in order not to dig new places, the birds return to their old “trenches”. This can also be understood by the cut off tops of plants.

To install the hinges, you need to have sufficiently large snowdrifts. To do this, fences are made from willow branches and stuck into the snow, as if imitating the tops of bushes. Approximately 40 centimeters are left above the snow surface. Fences are made like a fence with a distance of 2 meters. It is in these openings that the loops are made.

The fishing tackle is made as follows:

  • you need to take copper wire from 3 cores and knit conditional loops,
  • the diameter of the hole is 12 centimeters, and the length of the tail, which will be attached to the twig, is 50 centimeters,
  • a stick with a loop is placed in the snow so that the top is at a height of 15 centimeters,
  • the length of the fence itself and the number of loops depends on your desire, you can make a lot of them,
  • Walking through the snow, the bird gets its head caught in a noose.

We suggest you read: Catching perch with a float rod

We hope that our tips will help you successfully catch partridges. We also note that the most successful catching of birds is in the spring, especially for males, who are clearly visible and lose their vigilance due to the approaching mating season.

One of the easiest ways to hunt without weapons in winter is with homemade traps. They are made with their own hands from different materials: sunflower stems, thin slats, rope mesh. The distance between the slats is no more than 5 cm. The base for the trap is made of plywood or boards, measuring 1 * 1 * 0.5 m. A small door is made on each side, to which a tension rope is attached. Food is scattered inside and around the trap. Seeing the bait, the partridge enters the cage, touches the cable and the door closes.

Most often this method is used in winter hunting, but it is not prohibited in summer. How to make snares for partridges: loops are knitted from copper wire in three strands. Diameter - 12 cm, tail length - 50 cm. With the tail, the loop is attached to a peg or twig.

A ready-made trap is installed among snowdrifts and thickets of bushes, where it is easier to catch partridges. Fences are made from willow or birch branches and placed around the traps at a distance of 2 meters. Pegs are installed between them, to which a loop is attached at a height of 15 cm from the ground. You can scatter some food under the traps.

One of the easiest ways to hunt without weapons in winter is with homemade traps. They are made with their own hands from different materials: sunflower stems, thin slats, rope mesh. The distance between the slats is no more than 5 cm. The base for the trap is made of plywood or boards, measuring 1 * 1 * 0.5 m. A small door is made on each side, to which a tension rope is attached. Food is scattered inside and around the trap. Seeing the bait, the partridge enters the cage, touches the cable and the door closes.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]
Для любых предложений по сайту: [email protected]